dell dimensions 8400 manual

dell dimensions 8400 manual

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.Troubleshooting Tips. Battery ProblemsDiagnostic Lights Dell Diagnostics.Reinstalling Drivers. Front-Panel Inserts Floppy Drive.Boot Sequence. Clearing Forgotten Passwords Clearing CMOS Settings Cleaning Your ComputerDell Technical Support Policy (U.S. Only). Setup Diagram. Finding Information. Setting Up a Printer. NOTICE: Complete the operating system setup before you connect a printer to the computer. See the documentation that came with the printer for setup information, including how to Obtain and install updated drivers. Connect the printer to the computer. USB connector on computer. USB printer cable. USB connector on printer. Connecting a Parallel PrinterTurn off the computer (see page 59). If you are using a dial-up connection, connect a telephone line to the modem connector on your computer and to the telephone wall jack before you set up your Internet connection. If you are using a DSL or cable modem connection, contact your ISP for setup instructions. Setting Up Your Internet Connection. To set up an AOL or MSN connection:NOTICE: Do not move the computer when you are playing CDs or DVDs.Place the disc, label side up, in the center of the tray.For more information on volume control options, click Help in the Volume Control window.The following instructions show how to make an exact copy of a CD or DVD.The instructions tell you computer has integrated video, do not connect either monitor to the integrated video. In extended desktop mode, you can drag objects from one screen to the other, effectively doubling the amount of viewable work space. A RAID level 1 configuration sacrifices high data access rates for its data redundancy advantages. Setting Up and Using Your Computer. If a drive failure occurs, subsequent read and write operations are directed to the surviving drive. A replacement drive your computer.

http://www.oncopathologie.com/userfiles/fisher-mt-6330-manual.xml

Tags:
• dell dimension 8400 manual, dell dimension 8400 manual pdf, dell dimension 8400 service manual pdf, dell dimension 8400 service manual, dell dimensions 8400 manual, dell dimension 8400 manual, dell dimension 8400 manual pdf, dell dimensions 8400 manual pdf, dell dimensions 8400 manual download, dell dimensions 8400 manual free, dell dimensions 8400 manual software, dell dimension 8400 manual, dell dimension 8400 manual pdf.

You must have at least two hard drives installed in your computer to set up a RAID configuration. NOTICE: You will lose any data on your hard drives when you create a RAID configuration using the following procedure. Install the operating system. Creating a RAID Level 1 ConfigurationYou already have a two-hard drive computer configured into an array, but you still have some space left on the array that you want to designate as a second RAID volume.NOTE: If you do not see an Actions menu option, you have not yet set your computer to RAID-enabled mode (see page 22).Click Next on the Migration Wizard screen.To Remove Spare Marking From a Spare Hard Drive:Click Reset Hard Drive to Non-RAID. Rebuilding a Degraded RAID 1 Volume. Standby Mode. Standby mode conserves power by turning off the display and the hard drive after a time-out. When the computer exits from standby mode, it returns to the operating state it was in before it entered standby mode. If the computer's hard drive becomes corrupted, Windows XP recreates the hibernate file automatically. Power Options Properties. To avoid this problem, always set the monitor to time-out before the hard drive. Advanced Tab. The Advanced tab allows you to Place the power options icon in the Windows taskbar for quick access.If the battery still does not work properly, contact Dell (see page 123). Card Fan Problems. Drive Problems. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Hard drive problems. For help, contact your Internet service provider. Error Messages. In some cases, you might have to restart your computer to restore computer resources. If so, run the program that you want to use first. O P E R A T I N G S YS T E M N O T F O U N D - Contact Dell (see page 123). IEEE 1394 Device Problems. The computer does not start up. C H E C K T H E D I A G N O S T I C L I G H T S - See page 49. A solid blue screen appears.

http://www.glaskunstcentrum.nl/images/fisher-papa-bear-wood-stove-owner-s-manual.xml

TU R N T H E C O M P U T E R O F F - If you are unable to get a response by pressing a key on your keyboard or moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Mouse Problems. Power Problems. Remove and then reinstall the graphics card, if applicable (see page 81). I F T H E P O W E R L I G H T I S B L I N K I N G A M B E R - The computer is receiving electrical power, but an internal power problem might exist. R E I N S T A L L T H E P R I N T E R D R I V E R - See the printer documentation for instructions. Scanner Problems. CAUTION troubleshooting information. U N L O C K T H E S C A N N E R - Ensure that your scanner is unlocked if it has a locking tab or button. Sound and Speaker Problems. No sound from speakers. NOTE: The volume control in some MP3 players overrides the Windows volume setting. Video and Monitor Problems. See the monitor documentation for troubleshooting procedures. If the screen is blank. Solving ProblemsCAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.Problem Description Another failure has occurred. If you cannot resolve the error condition, contact Dell (see page 123). NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell. Windows XPUnder Pick a Category, click Performance and Maintenance. Click System. In the System Properties window, click the Hardware tab.Click System Restore. Follow the instructions on the screen. Restoring the Computer to an Earlier Operating State. If possible, back up the data before using PC Restore. To use PC Restore:The restore process takes approximately 6-10 minutes to complete. When prompted, click Finish to reboot the computer. NOTE: Do not manually shut down the computer.

Click Finish and let the computer completely reboot. A component can be replaced or-if purchased separately-installed by performing the removal procedure in reverse order. Recommended Tools. Before Working Inside Your Computer. Use the following safety guidelines to help protect your computer from potential damage and to help ensure your own personal safety. Wait until this light turns off before you remove the floppy disk from the drive. (On computers with an optional floppy drive.) The hard drive light is on when the computer reads data from or writes data to the hard drive. Instead, perform an operating system shutdown.Connect a parallel device, such as a printer, to the parallel connector. If you have a USB printer, plug it into a USB connector. If your monitor has a VGA connector, plug it into the VGA connector on the computer.Use the two view slots to align the pivot bar with the two pivot-bar slots.Reattach the front-panel insert. Reconnect the computer power cable to the electrical outlet. Reattaching the Front Door. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Memory. You can increase your computer memory by installing memory modules on the system board. Your computer supports DDR2 memory. DDR2 Memory Overview. NOTE: Memory purchased from Dell is covered under your computer warranty.NOTICE: To avoid damage to the memory.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. PCI Cards. If you are installing or replacing a card, follow the procedures in the next section. Then continue with step 5. If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card.

The notch in the top of the card or filler bracket fits around the alignment guide.If you installed a sound card:Enter system setup (see page 111), select Audio Controller, and then change the setting to Off. Remove the card's driver from the operating system. If you removed a sound card:Enter system setup (see page 111), select Audio Controller, and then change the setting to On. Connect external audio devices to the audio connectors on the back panel of the computer. PCI Express x16 card. PCI Express x1 card. PCI Express x16 card slot. PCI Express x1 card slot. If you are installing or replacing a PCI Express card, follow the procedures in the next section.If necessary, disconnect any cables connected to the card. If a card fan is not present in your computer and you are installing a graphics card that runs higher than 75 W, contact Dell (see page 123) to find out how to purchase a card fan.Do not connect the network cable to the integrated connector on the back panel.Enter system setup (see page 111), select Audio Controller, and then change the setting to On. Connect external audio devices to the audio connectors on the back panel of the computer.Removing and Installing PartsRoute the card fan cable through the cabling slots. Your computer supports a combination of these devices Up to two hard drives One optional floppy drive One optional Zip drive Up to two CD or DVD drives. General Installation Guidelines. Power Cable ConnectorHard Drive. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.Removing and Installing Parts. Installing a Hard DriveCheck the documentation for the drive to verify that it is configured for your computer. Exit system setup, and restart the computer. Partition and logically format your drive before you proceed to the next step. See the documentation for your operating system for instructions.

Gently slide the first hard drive into the lower bay until you hear a click. Reconnect the power and data cable to the back of the first hard drive. Gently slide the new hard drive into the upper bay until you hear a click.Remove the insert from the insert frame by pressing on the four tabs. Removing and Installing PartsIf you are adding a floppy drive that was not purchased from Dell, reattach the empty insert frame over the front of the drive bay. 96. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. Installing a Floppy DriveVerify that your computer works correctly by running the Dell Diagnostics (see page 52). CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.Connect the power and data cables to the drive.Battery. Replacing the Battery. See the Product Information Guide for battery disposal information. Closing the Computer CoverRemoving and Installing PartsAudio Type ADI 1980 AC97 Codec. NOTE: This audio type is present only on computers with integrated. Controls and Lights Power control Power light push button green light - Blinking green in sleep state; solid green for power-on state. Entering System SetupPerformance. Maintenance. CMOS Defaults Event Log BIOS Update This setting restores the computer's factory-installed default settings. Displays the system event log. USB Flash Device - Insert the memory device into a USB port and restart the computer. Write down your current boot sequence in case you want to restore it. Press the up- and down- follow the safety instructions located in the Product Information Guide.Locate the 3-pin password jumper (PASS) on the system board (see page 71), and attach the jumper plug to pins 2 and 3 to clear the password.Locate the 3-pin CMOS jumper (CLR CMOS) on the system board (see page 71). Dell Technical Support Policy (U.S. Only).

All Dell-standard components included in a Custom Factory Integration (CFI) project are covered by the standard Dell limited warranty for your computer. Department Name or Service Area, Website and E-Mail Address. Area Codes, Local Numbers, and Toll-Free Numbers toll-free: 800-335-0031 1-800-805-5924. Area Codes, Local Numbers, and Toll-Free Numbers. Country (City) International Access Code Country Code City Code Ireland (Cherrywood) International Access Code: 16 Country Code: 353 City Code: 1. Customer Technical Support. Panama Peru Poland (Warsaw) International Access Code: 011 Country Code: 48 City Code: 22. Country (City) International Access Code Country Code City Code U.K. (Bracknell) International Access Code: 00 Country Code: 44 City Code: 1344. We delete comments that violate our policy, which we encourage you to read. Discussion threads can be closed at any time at our discretion. I ran the dell diagnostics utility and it came up with a bad memory module on slot 0. Can you tell me: 1. If I have the case open and I'm looking at the motherboard, from which side does the memory increrment. From the left or right? 2. I know? I have 3GB in there but I see 4 sticks. Something isn't right.!!! Thanks for the help.It sounds like a ram mismatch taker them out and look at the individual sticksyou may have 2x1gig modules and 2x 512 gig modules, that would add up to 4 and fill all of the slots. Login to post Cannot seem to find drivers through Dell support The X300 SE message is your video card. So your video card works, the system mostly works, but the BIOS isn't starting up. You should contact Dell and tell them the situation.Stop:0x00000024 (0x0019023,0x8afac820,0xc0000102,0x00000000) restarted F2 setup then I ran full diagnostic tests. All passed. What do I need. This should get you back.Most Dell pc come with a below average power supply. I recommend replacing your power supply with a better one.

Do a search on Google for a good replacement power supply for you Dell 8400. Please rate response. See Dell website below:As you have already replaced the RAM. To confim the same, run a diagnostics on the Hardrive. You can run the same in two ways. Check if have the utilitu partision still left on the hardrive 1. Tap on the F12 key 5 - 6 times when you see the Dell splash screen, before windows starts to load. 2. Select Hardrive diagnostics or IDE diagnostics If the above is no there, look for the dell Rescouce cd 1. Boot the system using the dell Resource Cd. 2. Select 32 bit diagnostics from the menu 3. Run a custom test on the hdd. If the hardrive fails, replace the same, otherwise try swaping it connector cable with the optical cable. Thanks ProtonSee this diagnostic chart. Cannot seem to find drivers through Dell support Answer questions, earn points and help others. Check the latest browser version I looked at the owner's manual for the Dimension 8400 online and it will only support 1 GB per slot. The only way you could have 4 GB is if you had 4 x 1 GB sticks. Also you probably have Windows XP 32-bit which will only use up to 3 GB of ram. Your best best would be to buy just 1 x 1 GB stick and put it in there because you probably wont see any higher performance gains beyond that. Plus the since the computer is older it will be bottlenecked by the processor and video card anyway so adding a ton of ram wont be a miracle cure. I looked at the owner's manual for the Dimension 8400 online and it will only support 1 GB per slot. Thats my 2 cents. Link is below for a 1 GB stick. I appreciate that info. Only thing is on Dell's site it says the 8400's Motherboard can take up to 4 gb of ram. The thing is I want to get something good not no BS ram. So is crucial a good brand.The best for your money would be just to get 1 stick of 1 GB or maybe 2 sticks if you want to.

It may work in a 2 x 2 GB configuration but the mobo isnt made for that so it would be a risk and I dont think you will see any difference in speed with anything higher that 2 GB total on Windows XP 32 bit. If you want NextDay, we can save the other items for later. Order by, and we can deliver your NextDay items by. You won’t get NextDay delivery on this order because your cart contains item(s) that aren’t “NextDay eligible”. In your cart, save the other item(s) for later in order to get NextDay delivery. Oops! There was a problem with saving your item(s) for later. You can go to cart and save for later there.A different kind of membership. Learn more See our disclaimer GH003 DELL DIMENSION 8400 MOTHERBOARD Grade A Like New Condition 100 Tested and Working No accessories, cables or manuals are included unless otherwise noted 30 Days for refund or replacement Order by 3pm Est to ship same day Please check your original part and match the part number with the part number being ordered. Most parts are not interchangeable. Specifications Features Replacement Part Only. No accessories, cables or manuals are included unless otherwise noted Brand Dell Manufacturer Part Number GH003 Manufacturer Dell Customer Reviews Write a review Be the first to review this item. Ask a question Ask a question If you would like to share feedback with us about pricing, delivery or other customer service issues, please contact customer service directly. So if you find a current lower price from an online retailer on an identical, in-stock product, tell us and we'll match it. See more details at Online Price Match.All Rights Reserved. To ensure we are able to help you as best we can, please include your reference number: Feedback Thank you for signing up. You will receive an email shortly at: Here at Walmart.com, we are committed to protecting your privacy. Your email address will never be sold or distributed to a third party for any reason.

If you need immediate assistance, please contact Customer Care. Thank you Your feedback helps us make Walmart shopping better for millions of customers. OK Thank you! Your feedback helps us make Walmart shopping better for millions of customers. Sorry. We’re having technical issues, but we’ll be back in a flash. Done.