4 channel h.264 digital video recorder user manual

4 channel h.264 digital video recorder user manual

For example: (See page xx.) On screen buttons or menu items appear in bold. Avoid direct sun light and avoid heat.However, it is recommended that you refer to this manual for detailed configuration and operation. Please follow the instructions on this section for general setup procedures to make the unit operation. You may use BNC to Composite Video 7 Adapter if necessary. These video output ports (LOOP OUT) can be used to display each individual video input to a desired display device which support BNC input. Make sure the unit is fully turned on before powering down. First Initial Boot Entering Setup Menu for First Time Upon initial boot, unit will prompt you with initial boot message. Unit will check to see all the Hard Disk Drive is installed properly, Network Communication is functional and ready to operate, and upon completing initial system check it will display maximum allowed split screen of the live view. Select the Schedule page by using the drop down list located near upper left corner.Your DVR unit may or may not have HDD, CDR or DVDR installed. In such case you must perform hardware configuration before unit is operational. You may also decide that the DVR unit will be installed in rack enclosure. This section also explains how to install rack mount bracket for equipment mounting. You will need to have Phillips screw driver and area safe from Electro Static Discharge (ESD). You will be required to remove smaller size screws to open and close the case. Please be careful not to misplace the screws, they are oftentimes difficult to find at hardware stores. You must disassemble the top cover of the DVR to expose the unit as seen below diagram. The DVR uses Serial ATA hard disk drives. Only the approved hard disk drives will work in the DVR unit. A rack mounting kit is supplied with the unit that includes two rack mounting brackets and sets of rack screws. Rack mount bracket installation Step 1. Connect a VGA monitor to the DVR with a standard VGA Cable.http://puisan.ru/uploads/bosch-laser-rangefinder-manual.xml

Tags:
• zmodo 4 channel h.264 digital video recorder manual, 4 channel h.264 digital video recorder manual, 4 channel h.264 digital video recorder user manual, 4 channel h.264 digital video recorder user manual 2017, 4 channel h.264 digital video recorder user manual download, 4 channel h.264 digital video recorder user manual pdf, 4 channel h.264 digital video recorder user manual free.

We recommend using a 17” LCD or CRT monitor or above.The corresponding video channels can be “looped” out using the “loop out”. The required settings to use the RS-232 port can be configured in the DVR settings. FRONT PANEL KEY CONTROLS 1. Keys The keys on the front panel are used to control all functions of the DVR. Symbols will be located near each key to represent its function. Sequence: Used to engage video sequence mode in single channel view.For the purpose of reference and easy operation this section will show what conventions are used to explain to use and navigate through the user interface. Main Setup Menu The Main Setup Menu may be accessible To access the main menu, press the “Menu”. They are Version, Storage, System Log. They each indicate status information pertaining to the DVR unit. General information regarding the DVR unit and wellness of the unit can be checked on this section. If the USB memory stick is not present or file is not correct software file, system will prompt error message. You must use caution when updating software to the DVR unit. These conditions are must be kept when upgrading software (firmware) for the DVR unit. The overwrite option will start erasing earliest recorded data and replace it with current recording data. If you have multiple hard disk drives installed, then first drive will be written and when data is full then the DVR will start recording to the next available drive until they are all full. Each drive’s total size currently allocated with data and space available of the hard disk drive is indicated in this window. Types of Logs available in the DVR system Figure 25 System Log Tab Page Motion. If you do not set the Admin password then anyone may able to erase evidence, access the DVR via network, and change parameters to the DVR system. In this popup window you may select privileges associated with accounts selected in Item 1. Select User Type.http://www.novvit.ru/upload/file/bosch-lawnmower-rotak-34-manual.xml

In this window you may enable all check boxes by selecting Select All check box. With radial buttons selected to the “On” setting you may also control the volume for the microphone. Speaker section also has selectable radial buttons “On” and “Off”. With radial buttons selected to the “On” setting you may also control the volumes for the 4 available channels for audio output. There are six categories of configuration possibilities listed after check box and they are System, Display, Camera, Record, Device, and Network. They are the same categories of items selectable at Main system menu. Then simply press the “Default” button on the center of the screen to apply the factory default configuration. Figure 37 Configuration Window with Factory Default button pressed CHAPTER. You may choose the year to appear first or moths to appear first.There are identical check boxes available for Live and Playback section. These check boxes are to choose what display items to appear for live and playback display screen.. Margin Setup button will bring up the to control the viewable margin for the live view screen display. Figure 43 Margin Setup Popup Screen display may be positioned by using the Left, Right, Top and Bottom marginal selector they. First type of Spot monitor is programmable Digital Spot monitor. And second type is Analog Spot monitor that has simple configuration setting. Click either 1 or up to 4 camera (when selected 2X2 in the Split Selection section) Figure 47 Channel Selection Popup. ITEM Type the desired label and “X” to close the popup window. Figure 53 On Screen Keyboard popup Covert ITEM Click on the check box to enable the cover option. To configure hue slide hue control slider that controls ITEM the hue. Copy Setting Upon pressing Copy Setting button, Copy Settings popup will appear. It is very important to have different ID configured to the PTZ cameras.http://www.drupalitalia.org/node/71050

Baud Rate ITEM This drop down list shows all the possible baud rate configuration option that could be chosen Data Bits In this dropdown list bar you may select from 5 to 8 bits. First you must select the channel in the DVR unit that has PTZ configured and be at Full Screen view.. Preset Configuration ITEM Here you can view configured preset, configure preset and also delete preset. NOTE: About Presets for PTZ Presets configured will be written to the firmware of the PTZ camera itself (PTZ presets are recorded in to PTZ's memory). You may navigate to any other desired menu by click on the button located on the top left side of the screen. Day Setting: Figure 62 To activate or deactivate each channel, please click on the button. (Figure 62) ITEM Specifies the video channel number Min. Blocks ITEM Specifies the minimum number of blocks to detect for motion in the zone specified. Sensitivity ITEM There are a total of 5 settings for motion sensitivity, with “Highest”. Blocks ITEM Specifies the minimum number of blocks to detect for motion in the zone specified. Sensitivity ITEM There are a total of 5 settings for motion sensitivity, with “Highest”. Once your desired settings have been made, please click on the “Save” button to apply the changes. If you desire to discard the changes made to this menu, please click on the “Cancel” button. To restore the original factory settings, please click on the “Default” button.Configuring Alarm Input Alarm input is configured in Alarm In window. This window can be accessed by using the quick navigation drop down list from any configuration window. The “Pre-Alarm” settings will not be affected because these settings are used for the “pre-event” recording only.Properties 5 -2 The PROPERTIES selection box are the optional attributes to copy from the source channel. You may select each individual channel, a group of channels, or all channels to apply the record settings to. Mode ITEM. ITEM CHAPTER 14. RECORD 3.http://anapanic.com/images/4-element-steppir-manual.pdf

Holiday Schedule The Holiday Schedule is used to specify certain holidays’ throughout the calendar year. This setting may be used to make exceptions to the recording schedule due to holiday hours and days of operation during these times. Then press “Ok” to save the setting, or press “Cancel” to discard the changes made.If you desire to discard the changes made to this menu, please click on the “Cancel” button. To restore the original factory settings, please click on the “Default” button. There are multiple search options you may use to find the desired video you wish to view. Days with recorded video ITEM data will be shown in bolded red color font. Select the desired day with recorded video data, and then press search (item 6). Date and Time. Minute Display The minute display section will show the available recorded video data in minutes. You may choose an individual channel, a group of channels, or all channels. Event Type The event type option is used to choose what type of events you wish to search for. You can then specify a page number to jump to. Cancel ITEM Press the cancel button to close the current search window. Once you let go of the left click button the zone will be drawn in red. Motion List ITEM The motion list displays all motion events found from the search criteria specified on the previous page (motion search).These features must be properly configured so that functionality of the corresponding devices may operate properly. A thorough understanding of these functions and ports are recommended for better operation of the DVR and third party devices. The size will be set in megabytes. ITEM After selecting the backup size, the to date and time will be adjusted automatically according to the backup size you specify. If the ITEM date and time specified is not available, the closest date and time available to the specified date and time will be selected.

Cancel ITEM The cancel button will close the current window and cancel all changed settings in this section. These bits are always represented ITEM by a negative voltage and will determine when data transmission will cease. The options for the stop bits are 1, 1.5, and 2 bits. Parity The parity bit is used as a simple method of error checking. Save ITEM The save button will apply the settings made to this menu. Default ITEM The default button will restore the original factory settings to this menu. CHAPTER 15. There are various options in this menu for different networking environments. Item 1 Item 2 IP Address Item 3 Subnet Mask Item 4. The DVR will continually request your network’s addressing information, or you may manually enter it by selecting “Static IP”. Once your desired settings have been made, please click on the “Save” button to apply the changes. If you desire to discard the changes made to this menu, please click on the “Cancel” button. You may navigate to any other desired menu by click on the button located on the top left side of the screen. CHAPTER 16. NETWORK 2. DDNS The DDNS menu is used to configure your DVR to connect to our DDNS server. Item 1 DDNS Item 2 DDNS Server Item 3 Host Name Item 4 Item 5. To restore the original factory settings, please click on the “Default” button. You may navigate to any other desired menu by click on the button located on the top left side of the screen. CHAPTER 16. NETWORK 3. Server Setup Figure 101 Web Server ITEM You can choose to turn the Web Server Function “On” or “Off”. Port ITEM You may specify the port number for the web server, or you may leave the default port setting of “80”. Figure 103 PPPoE ITEM You can choose to turn the PPoE function “On” or “Off”. ITEM Please enter the ID associated with your ADSL service. Password ITEM Please enter the Password associated with your ADSL service. Please click on the “Email” tab to access the menu.

Once your desired settings have been made, please click on the “Save” button to apply the changes. If you desire to discard the changes made to this menu, please click on the “Cancel” button. To restore the original factory settings, please click on the “Default” button. You may navigate to any other desired menu by click on the button located on the top left side of the screen. Email Figure 105 Send Email ITEM You can choose to turn the Send Email function “On” or “Off”. Send Server ITEM Please enter your SMTP server address here. Recipient2 ITEM Please enter a second recipients email address here (optional). Please click on the “Notification” or “Event” tab to access the menu. Once your desired settings have been made, please click on the “Save” button to apply the changes. If you desire to discard the changes made to this menu, please click on the “Cancel” button. To restore the original factory settings, please click on the “Default” button. You may navigate to any other desired menu by click on the button located on the top left side of the screen. Event Figure 106 The “Event” tab is used to specify a server to send event notifications to. IP Address ITEM Please specify an IP address of the PC that has the installed Event Server Program. Please contact us for availability or for an alternative item.It features H.264 Video Compression Technology - allowing for higher resolution image recording with smaller file sizes, Multiplex Operation allowing live display, record, playback and network operations simultaneously and Intelligent Video Motion Detection recording. The system has been designed to allow quick and easy installation and comes with an easy to follow operation manual. The DVR can record globally at 25 fps at D1 resolution (704 x 576) or 100 fps at CIF (352 x 288) resolution. You can adjust the recorder settings for both image quality and frame rate, and when the HDD is full, you can set the DVR to automatically record over the oldest footage.

If connected to a windows PC network, footage can be viewed over the network using the included software. If the network has a high-speed Internet connection, footage can also be viewed remotely over the Internet. The included 1TB hard disk drive can record for approximately 16 weeks with all cameras set at D1 resolution at a recording rate of 6 frames per second, per camera. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with H 264 Dvr Manual. To get started finding H 264 Dvr Manual, you are right to find our website which has a comprehensive collection of manuals listed. Our library is the biggest of these that have literally hundreds of thousands of different products represented. I get my most wanted eBook Many thanks If there is a survey it only takes 5 minutes, try any survey which works for you. WARNING: To prevent a risk of fire of electric shock, do not expose this product to rain or moisture. All rights reserved. Recording playback with HDMI 1080P Output 16ch Hybrid dvr NVR Onvif CCTV DVR Recorder. LH116 Series (16-channel model). For the latest. H.264 compression video compression?. Step 1 of 2: Obtain the DVR s local IP address and Web Port.Do not power off the DVR when the device is function. The correct procedure to shut down. EHV Hybrid H.264 DVR. Digital Recording and. This new EverFocus digital video recorder is based on H.264 compression. H.264 Super Digital Video Recorder User Manual. 2.5 Installation connections sketch map (16CH DVR as an example the following,please prevail in kind).Reload to refresh your session. Reload to refresh your session. Hikvision IP Villa 2 gen.Recently added: My Cart is empty CHECKOUT COMPANY CONTACT Regulations SUPPORT Library News Library Newsletter Diagrams SatNet It can be used in any monitoring system that requires high-resolution recordings, preview in real time and efficient compression standard, but does not operate in a very dynamic environment. H.

264 compression and compatibility with hard drives of capacity up to 2TB enable recording of very large amounts of video data. VGA output with maximum resolution of 1920x1080 px (Full HD) can cooperate with LCD or CRT monitors. Additional video output (BNC - CVBS) provides the same information with resolution limited by PAL or NTSC standard. The DVR can be operated locally, using the included USB mouse, remote control, or the keys on the front panel, as well as remotely via the Internet (Internet Explorer). The device is supplied with free software for remote monitoring via mobile phones and free software for installing on PC computers running Windows(R) OS (the list of compatible devices can be found in the manual). Distinguishing features of TREND DVRs: Excellent image quality Stable, reliable operation H.264 video compression Real-time operation system: simultaneous recording, playback, monitoring, archiving Flexible configuration - independently for each channel Audio recording with G.726 compression Ability to create up to seven independent user accounts with individual rights (local and remote management Easy and intuitive graphical menu. Easy access to additional functions. Support for external devices (alarm inputs and outputs) Compatibility with PAL, NTSC, SECAM video systems BNC and VGA outputs (operating simultaneously). Depending on the product and manufacturer, the warranty period lasts from one year to 15 years. The duration of the. Its parameters are crucial for the quality and reliability of camera video recording.

(W) 16cm Outlet materail:PP Drive speed ratio: 3:1 outlet pipe diameter: 40mm Inside diameter of honey hole: 4mm Net weight: 9kg Custom label: 5662-0353 In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading. Amazon calculates a product’s star ratings based on a machine learned model instead of a raw data average. Picnic s now 1.0 out of 5 stars Diane like the engagement between the the gearing (a bit slack leading to slipping) It does spin the honey out of the frames. Works!Replaced them myself rather than send it back. Does the job Ok and you get what you pay for. Quick delivery. Well packaged. It has a free hand wheel and reverse adjustable brake making extracting breeze. As an added bonus the gear set is easily removed by unscrewing the metal bar from the extractor drum. Our Premium Extractors are robust, reliable and especially made to be top of the range! The manufacturer uses their extensive experience in the beekeeping industry to manufacture high quality products perfect for beekeepers. With 30 years experience in manufacturing and decades of beekeeping experience this product has been made to last and is of a high standard. It will not affect your honey. It's completely normal. The way your extractor has been built (angled base) counters any honey touching the oil or grease. Do not be worried about your honey getting in contact with the oil or grease, they will not touch It has a free hand wheel and reverse adjustable brake making extracting breeze. As an added bonus the gear set is easily removed by unscrewing the metal bar from the extractor drum. Our Premium Extractors are robust, reliable and especially made to be top of the range! Higher quality stainless steel, more robust gear set and handle and better welding, sloped conical base and upgraded 42mm stainless steel honey gate valve are just some of the features.

The manufacturer uses their extensive experience in the beekeeping industry to manufacture high quality products perfect for beekeepers. With 30 years experience in manufacturing and decades of beekeeping experience this product has been made to last and is of a high standard. Extractors are not fridges or dishwashers free of scratches, the make of these extractors does not affect their effectiveness. It will not affect your honey. It's completely normal. Do not be worried about your honey getting in contact with the oil or grease, they will not touch Minto NSW 2566 - ph 02 9731 7400 ABN: 6016830384. Handles Up to 4 deep frames, 8 medium frames and 12 shallow frames. Free Shipping in Continental United States and Canada - 30 day 100 Money Back Guarantee - 2 Year Warranty Be the first to write a review. Any time, any requirement will get Prompt Reply from our well-trained and friendly support staff. As for Market, because of our high standard of production and excellent service, now we have gained countless customers and good reputation from all over the world, especially in North America, Europe, Oceania and Mid-east area. In the future, we will put much more effort to build connection with more customers in more area. All we want to do, is to connect the world by our products, to share the Value, Happyness and Achievement with more customers. Organic Honey:organic acacia honey;organic jujube honey;natural flower honey;raw liden honey and the other raw honey 2). Natural Bee propolis:raw propolis;bee propolis capsule;bee propolis powder;bee propolis tablets;water solubility bee propolis 3). Barrel body Seamless welding technology, more durable to use, safer, more gorgeous. Pls kindly tell me the voltage and plugs that you need before the order. Updated daily.Updated daily.A wide variety of 4 frame manual honey extractor options are available to you, such as new. There are 94 suppliers who sells 4 frame manual honey extractor on Alibaba.com, mainly located in Asia.

The top countries of supplier is China, from which the percentage of 4 frame manual honey extractor supply is 100 respectively. Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Please try again.In order to navigate out of this carousel, please use your heading shortcut key to navigate to the next or previous heading. In order to navigate out of this carousel, please use your heading shortcut key to navigate to the next or previous heading. Register a free business account Exclusive access to cleaning, safety, and health supplies. Create a free business account to purchase Please try your search again later.You can edit your question or post anyway.Seamless welding construction for easy clean. The operation method is simple, time-saving and labor-saving. No sharp edges for safe operation. The honey gate at the bottom of the tank allows the honey to flow at your will.Ideal for the hobbyist or small apiarist. Featuring a 120 W 1.1A, 1300rpm motor with variable speed options, a base, 3 stainless steel legs and a plastic honey gate. It also comes with 2 clear perspex lids to allow observation during the extraction process.Easy to assemble and operate, suitable for the hobbyist bee keeper.In order to navigate out of this carousel, please use your heading shortcut key to navigate to the next or previous heading. Amazon calculates a product’s star ratings using a machine learned model instead of a raw data average. The machine learned model takes into account factors including: the age of a review, helpfulness votes by customers and whether the reviews are from verified purchases. Please try again later. Jean-Pierre De Montigny 5.0 out of 5 stars The company responded very quickly to my inquiry. A replacement was sent promptly. No issues, no argument. I have used it a couple of times and I am very happy with the performance.

I screwed it on a heavy wood frame. It has two benefit. It keeps it stable so that I can uncap other frames while the extraction is taking place. No need to hold the thank. If it is not balanced like when extracting one or three frames then I just stand on the wood structure. The second advantage of the wood platform is that it raises it so that the honey valves is high enough for a 5-gallon container. Very much worth the price.The plexigass lid cracked and I had to get a replacement. The valve had a half shredded seal. And the valve was put together backwards. The hole in the bottom was still full of sharp metal bits. Itabsolutely needs to be filed down before use. The handle keeps unscrewing as you spin the extractrator around.I got great support from their service department. I admit I was quite surprised how well and how fast they solved my little problems. Packaging could be better. The extractor works fine. For this price couldn't have asked for better. Would buy again.Easily spins 3 frames at a time. Ideal for hobby or small beekeeping organizations. Excellent customer support.La seule chose c'est a laver, un peu plus de sport, mais se fait quand meme bien.Je recommande pour des debutants comme nous!!! Bon rapport qualite prix!!!Rapide pour extraire le miel.Such an excellent seller. Top notch service and solutions on any potential hiccups. Highly recommend!Good quality, works well, the bottom is flat and the honey gate is a little bit elevated off the bottom so you have to finagle the last bit of honey out of it, but for the price I can't complain. Haven't had any issues and have extracted a number of frames with it so far. Should get me by for a year or two until I get above 20 hives.Sorry, we failed to record your vote. Please try again But a 5 gal bucket will not fit under it but a smaller bucket will. Also please clean it before you use it.Sorry, we failed to record your vote. Please try again Sorry, we failed to record your vote.

Please try again Watch out for the sharp edges on the legs though they'll get you.Sorry, we failed to record your vote. Please try again Works good for a hand one!Sorry, we failed to record your vote. Please try again The hard part is unscrewing the top every time to clean it.Sorry, we failed to record your vote. Please try again. By continuing to browse the site you are agreeing to our use of cookies. I agree You must have JavaScript enabled in your browser to utilize the functionality of this website. Tangential extractors are the most universal honey extractors: during the spinning process, the hive frames are tangentially positioned to the vessel thus making the honey divert without any problems. This manual honey extractor has a solid construction and is sturdy on its 3 feet. All parts getting into contact with honey are made of stainless steel and are approved for food. The apparatus consists of an outer drum, an inner basket for the spinning along with comb frame holders and a tap for the drainage. The spinning basket allows room for 4 frames. There can be set not only frames for Zander dimension but also frames for DIN standards. A traverse is connecting the hand crank with the spin basket. Due to the smooth-running hand crank drive the inner basket is set in motion. Because of a centrifugal force, the honey is being injected from the combs on the wall of the basket and thereafter is running to the ground. With the help of the drain tap, the honey can now be collected in a suitable vessel. The cover of the device is made of transparent plastic and has 2 removable parts. An inspection of the spinning process is possible at any time. Of course all parts of this honey extractor can be easily cleaned. This tangential manual honey extractor is designed to hold up to 4 frames and is simple to use. The extractor is made from high food grade stainless steel and is a very durable extractor for the hobbyist or small apiarist bee keeper.

The 2 clear acrylic lids allow easy inspection of the extraction process as you are harvesting the honey. The extractor has a two option height adjustment, depending where you fix the screws on the legs when assembling. It can either be 30cm or 40cm vertical distance from the lowest point of honey gate to there ground. The Third Party Seller is responsible for the sale and dealing with any claims or any other issue arising out of or in connection with the product. For further details about the Third Party Seller’s terms and conditions of sale, please visit the Third Party Seller's terms and conditions located on the product listing.Remember, you can unsubscribe at any time.