3m xt-1 headset manual

3m xt-1 headset manual

Unauthorized modifications may void the authority granted under Federal Communication Rules and Industry Canada Rules permitting the operation of this device. The range is 0 (silent) to 20 (maximum).The range is 0 (silent) to 20 (maximum).Note: To avoid feedback and echo, set the volume as low as possible.The headset would have to be registered again at a later date. Change Site Scheduling The site schedule is the calendar of store open and closing times. Do not bend the boom.If a battery has not been used for several weeks, make sure to charge it prior to use. Contact your 3M representative for additional instructions.The four-character date code stamped on each 3M battery (wwyy) refers to the week and the year the battery was manufactured. Batteries are generally usable for two years beyond that date. V3 Greeter Modules require XT-1 base station software version 4.00 or later to function properly.Outside that period, the XT-1 system ignores all vehicle detection signals and records no data. Valid Time is usually set to match the store’s working schedule, but it can also be configured to allow monitoring of after hours drive-thru traffic. These email trigger settings dictate when data is transmitted. Each trigger can be enabled independent of the others. This warranty does not cover: (1) the cost of shipping products to or from 3M for repair, (2) repair or replacement of existing cable or wiring, (3) product failure caused by misuse, abuse, improper installation, or unapproved modifications, or (4) intercom products that are installed or serviced by a non-3M authorized party. Very often issues with 3M XT-1 begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Headphones 3M XT-1 is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Headphones on our side using links below.http://senecaconsulting.com/userfiles/4-runner-manuals.xml

Tags:
• 3m xt-1 headset manual, 3m xt-1 headset manual, 3m xt-1 headset managers service kit, 3m xt-1 headset manual user, 3m xt-1 headset manuall, 3m xt-1 headset manual download, 3m xt-1 headset manual instructions, 3m xt-1 headset managers service kit, 3m xt-1 headset manual.

Operating InstructionsPage 5 Table of ContentsPage 6 Table of ContentsPage 8: FCC information Overview. Page 9 OverviewPage 10 OverviewPage 11: service ConfigurationPage 12: buttons ConfigurationPage 14: Logging into the Base Station with a PC ConfigurationPage 18: Registering headsets ConfigurationPage 19: Noise reduction level Configuration. Page 20: Time ConfigurationPage 24: Kitchen Noise Reduction ConfigurationPage 26: Site scheduling Configuration. Page 27: Passcodes ConfigurationPage 28: Save Installation Settings ConfigurationPage 30 Page 31: Operation OperationPage 32 OperationPage 33 OperationPage 34: Component Identification and Description OperationPage 36 OperationPage 37: Fitting the Headset OperationPage 38: Replace the Battery OperationWhen a battery isPage 43: Cleaning OperationPage 44: run OperationPage 46: Split lane mode OperationPage 48: Maintenance MaintenancePage 49: Location MaintenancePage 50: Charging Batteries MaintenanceTurn Headset Charger upside down. Page 51: Important Information about Rechargeable Batteries MaintenancePage 52: Headband pad MaintenancePage 53: Making Sure Batteries are Ready for Use MaintenancePage 55: Troubleshooting TroubleshootingPage 56 TroubleshootingPage 57: No communication Troubleshooting. Page 58: Paging problem TroubleshootingChange the talking mode. Audio on all. Page 59: Dead battery TroubleshootingNo lights come on. Page 60: APPENDIX: DECLARATION OF CONFORMITY Appendix: Declaration of ConformityPage 61: Specifications Appendix: Base Station SpecificationsPage 62 Appendix: G5 Charger SpecificationsYour choices are. Page 69: Alert Message External Trigger Inputs Appendix: Greeter ModuleGreeter Setup (System Defaults)Page 73: Greeter Setup (Customer Settings) Appendix: Greeter ModuleAcoustic echo. 20 Disposal, battery.51, 53. Acoustic echo cancelling. 20 Ear cup.37, 41. Adding. Page 76 Listen modes. 45 PTT (Push to talk). See Talking modes. Listing headsets. 19 Pull ahead prompt. 22. Page 77 Index.http://suyogmaratha.com/editorimages/4-runner-manuals.xml

Database contains 9 3M XT-1 Manuals (available for free online viewing or downloading in PDF): Operating instructions manual, Quick reference manual, Installation manual. Intercom System 3M XT-1 Installation Manual. This is an 3M product refurbished by R. 2. Making sure drive-thru restaurant orders are handled quickly and accurately is an excellent way to improve the QSR customer experience and keep guests coming back. Updated model, replaces Battery for 3M XT-1 or C Headset. The leader in drive-thru repair for over 40 years. Trained technicians specialize in drive-thru headset repair and timer repair for HME and Panasonic. Making sure drive-thru restaurant orders are handled quickly and accurately is an excellent way to improve the QSR customer experience and keep guests coming back. No Talk or listen from the menu sign when using the backup wired intercom. Asking your drive-thru customers to repeat themselves because of poor sound quality can lead to delays, incorrect orders and mounting frustrations. 3M XT-1 Headset with Battery - Refurbished. Enter the base station configuration mode. Connecting LIO to 3M XT Connecting LIO to 3M. Its sealed membrane switches help keep dirt and grease out, for fewer service calls. XT-1 3m xt 1 headset manual Headsets pdf manual download. View online or download 3m XT-1 Installation Manual. Like the XT-1, the very light headset operates without a beltpack order taker. XT-1 All-In-One Headset Programming (How to adjust 3m xt 1 headset manual the volume) HME. 3M XT-1 Installation Manual. CE services are not covered by the 3M Manufacturer's 3m xt 1 headset manual Warranty. Database contains 1 3M C Manuals (available for free online viewing or downloading in PDF): Installation instructions manual. Now, PAR is helping you tap into the full potential of your drive-thru with a. Out of Stock. This includes any external antenna. Find great deals on eBay for 3m headset and 3m drive thru headset.http://www.drupalitalia.org/node/67555

Instructions for G5 Headset Controls and Battery Charging. 3M is able to help you achieve these with 3m xt 1 headset manual the perfect combination of advanced technology, forward-thinking support and responsive service. This is an 3M product resold by R. headset. HME Wireless IQTM vs. Wireless Communication System. There are many, many of these systems operating in excellent condition all over the nation. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Combined with it’s lightweight and comfortable design, industry known sound clarity, and the 3M(TM) Basestation Package makes the 3M(TM) Drive thru system, Clearly the Sound Decision. Battery 3m xt 1 headset manual for BAT XT-1, 3M C Headset Intercom System. Title: Trifecta And that covers all brands, including HME, Panasonic and 3M. Find the user manual you need for your audio device and more at ManualsOnline. Ships in 1 business day. Refurbished - 3M XT-1 Headset with 3m xt 1 headset manual Battery. Call to Check Availability () Inline. Programming the Headset The 3M Base Station should be turned On (it probably stays on in your 3m xt 1 headset manual store) and the Programming Station should be connected to the Base Station (again, it probably already is). There’s no time for broken equipment in the drive-thru lane. The first headset on the market featuring in store reparability and Smart technology. 3M Products. Compare up to three products: Compare. Very often issues with 3M G5 begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Open as PDF Quick Reference Guide. Details about 3M Lithium Ion Battery Charger For XT-1 C Drive Thru Intercom No Manual, No Box. Sales, installation and support services. How to change the time on a 3M XT1 system. G5 headsets have 2 serial numbers - one for the G5 Control Pod and the other. User Manuals, Guides and Specifications for your 3M Intercom System.http://afhobiecat.com/images/3m-xt-1-installation-manual.pdf

1, results for 3m headset 3M Lithium Ion Battery Charger For XT-1 C Drive Thru. This system uses the same batteries and chargers as the XT Battery for 3M XT-1 or C Headset. 1. Updated model, replaces C Comm, Inc. User Manuals, Guides and Specifications for your 3M XT-1 Conference System, Headphone, Headsets, Intercom System, Telephone. The 3M C headset system was discontinued in, but it was an industry leader for several years.F. Technologies, Inc. Filter. 3M United States; All 3M Products; 3M Products 0 Results. View and Download 3M XT-1 installation manual online. Print a coupon below and place it in a box with your broken. You’ll also enjoy our convenient same day service and 4-month warranty.Note: You can place the base station in registration mode and perform headset resets on XT-1 systems without disruption to your other headsets, there is no interruption of service. The first headset on the market featuring in store reparability and Smart technology. Covered only by RFT warranty, not. Filter Results By. Sales, installation and support services. Faster, more accurate orders. XT-1 Headsets pdf manual download. This is an 3M product refurbished by R. If a reset is all that is needed, the headset will register without problem and away you go, back to work. This includes any external antenna. View and Download 3M XT-1 operating instructions manual online. The base station is turned on. Intended Use The 3M Headset Intercom System Model XT-1 is intended for use to provide 2- way radio-frequency audio communication in quick service drive-through restaurants and convenience stores. User Manuals, Guides and Specifications for your 3M C Intercom System. Fully Dig. Database contains 1 3M Manuals (available for free online viewing or downloading in PDF): Installation instructions manual. 3M XT-1 and. The 3M Programming Station Swing the microphone to one side until it. Improved communication. C Do not copy or distribute without written permission.

3m xt 1 headset manual Ships in 1 business day. This number is imprinted on the. Combined with it's lightweight and comfortable design, industry known sound clarity, and the 3M Basestation Package makes the 3M Drive thru system, Clearly the Sound Decision. Headset Intercom System. CE Microphone Ball. Showing of 0 Matching. Like the XT-1, the very light headset operates without a beltpack order taker. 3M United States; All 3M Products; 3M Products 0 Results. This is an 3M product resold by R. Same-Day Service. Click here to contact us. Database contains 1 3M Manuals (available for free online viewing or downloading in PDF): Installation instructions manual. Filter Results By. Instructions for XT-1 Headset Controls and Battery Charging. Note: You can place the base station in registration mode and perform headset resets on XT-1 systems without disruption to your other headsets, there is no interruption of service. Simply click and print the coupon below, put it in your repair box, and receive your discount. Model C Troubleshooting 3M February 25 7. Unpublished Work Delphi Display Systems, Inc. Skip navigation XT-1 All In One Headset Programming Instructional Video - Duration:.Database contains 9 3M XT-1 Manuals (available for free online viewing or downloading in PDF): Operating instructions manual, Quick reference manual, Installation 3m xt 1 headset manual manual. Showing of 0 Matching Products. The C system works OK. XT-1 3m xt 1 headset manual Telephone pdf manual download. If a reset is all that is needed, the headset will register without problem and away you go, back to work. Wireless communication system (6 pages) Headsets 3M G5 Quick Reference Manual.User Manuals, Guides and Specifications for your 3M XT-1 Conference System, Headphone, Headsets, Intercom System, Telephone. A complete drive-thru headset system designed to give your Quick Service Restaurant a competitive edge. Ships in 1 business day. 0 Results.

Get your FREE headset repair in three easy steps: 1. A forefront leader in drive-thru and express ordering communications with professional training and on-site experience in speed-of-service technologies. Our experts include over 40 years of field experience including IT management with both intra and inter network structures including point-to-point and vpn job-site environments. Daniels Security Systems combines these skills in today’s demanding area of loss prevention and time management while maintaining order accuracy with visual drive-thru interfaces. Providing a much needed dimension in today’s fast service market. A forefront leader in drive-thru and express ordering communications with professional training and on-site experience in speed-of-service technologies too. Providing a much needed dimension in today’s fast service market. Daniels Security Systems has been serving New England businesses since 1995. Family owned and operated to maintain a higher level of client retention through personalized service and onsite systems familiarity. Daniels Security Systems has been selectively chosen from thousands of security and communications firms for their industry leading attention to detail and superior installations with unparalleled customer service and support. Daniels Security Systems has proven to be a leader in digital security surveillance since 1999. Designing and implementing computer based technologies with CCTV video and audio recording devices years ahead of the industry competition.Designed specifically for the needs of quick service restaurants.The complete system includes a mounted LCD monitor, media player and software that delivers actionable operational intelligence that can increase revenue to your business. Each vehicle is matched with its order number to measure multiple service points simultaneously. Data available online or from your smartphone.

More than a drive-thru timer, DTOS is a suite of tools designed to work together to achieve optimal drive-thru performance. View your restaurants’ performance on your phone, tablet or PC.Game-based engagement makes work more enjoyable through instant rewards, gratification, motivation, and feedback. Integrated automatic goal-based feedback uses real-time data to help crews stay focused on their goals throughout the day. Goal-based feedback prepares your team to take on their next goal, lets them know exactly what they need to do to reach their current goal and congratulates them when they reach the top ranking. Group high-performing stores to determine the overall champion or low-performing stores to make competition more evenly matched. Leaderboard competitions can be grouped any way you want.If repair service is suggested by a Daniels Security Systems Representative continue to our Downloads section and complete a DVR Repair Form. Upon completion of the DVR Repair Form ship your unit, including the DVR Repair Form, to the address provided on the DVR Repair Form. Please Call Daniels Security Systems ASAP. It is important to select the correct driver of an article version. If the driver for the incorrect article version is used, the driver will not be installed succesfully. Or where can I send my product to be repaired? A defective product should be replaced by your point of purchase during the warranty period. What do I do? In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: Fill out the form below with as much information as possible and one of our help-desk staff will respond at the earliest opportunity. Our messages are answered in the order they are received. The confirmation will be send to your email address at the same time as well.

If you have not received the confirmation message, please check your spam or junk mail folder. Otherwise, fill out the form again with your correct e-mail address. By placing cookies, we can provide you as Using these cookies, we collect In our privacy policy, we explain further Microsoft recommends using Microsoft Edge as your default browser and supports Internet Explorer 11 (which can be opened via Edge) for backward compatibility for older web sites and apps only. We are taking extra precautions and following the recommendations of the CDC to ensure the safety and wellbeing of all our team members. Naturally, we want to help you do the same for yours. We are ready to help keep your drive-thru running smoothly, efficiently, and safely. Thank you for your continued business and allowing us the opportunity to serve you and your teams. Our technicians thoroughly check, repair, and upgrade to ensure like-new operation. Your purchase of these products includes a 4-month warranty. Please note that all refurbished items are subject to equipment availability. Advance Exchange Available. Learn more - opens in a new window or tab This amount is subject to change until you make payment. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab This amount is subject to change until you make payment. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or an item that has been returned to the seller after a period of use.

See the seller’s listing for full details and description of any imperfections. The AC Adapter is not the original one but it is included and works great. ” Contact the seller - opens in a new window or tab and request post to your location. Please enter a valid postcode. Please enter a number less than or equal to 1. Sellers may be required to accept returns for items that are not as described. Learn more about your rights as a buyer. - opens in a new window or tab You're covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. All Rights Reserved. User Agreement, Privacy, Cookies and AdChoice Norton Secured - powered by Verisign. Ensure the battery is fully inserted. Image 1 Image 2 Charging Batteries To charge a battery, insert the battery in one of the Charging Stations or place the G5 headset (with the battery inserted) into the Headset Charger slot as shown. The LED(s) on the battery will now flash Green indicating the battery is currently being charged. All four LEDS will be lit Green (steady) to indicate the battery is fully charged. Charge batteries after every shift. Battery Charger Headset Charging Station G5 Battery Indicator Light Modes Battery is out of G5 battery charger and the button has been pressed and held down. Each LED represents 25 charge. Indicator (LEDs from Top) All 4 LEDs Lit Green (Steady) Mode Description 100 charge 3 LEDs Lit Green (Steady) 75 charge 2 LEDs Lit Green (Steady) 50 charge 1 LED Lit Green (Steady) 25 charge Top LED Battery is in charger and is currently charging. 1st LED Flashing Green 2nd LED Flashing Green up to 25 charge up to 50 charge Each LED represents 25 charge. 3rd LED Flashing Green 4th LED Flashing Green up to 75 charge up to 100 charge Bottom LED Battery end of life. Top and Bottom LEDs Lit Green Replace the battery Headset Cleaning For good health and hygiene, every headset should be cleaned on a regular schedule.

Before cleaning, remove the battery and the soft foam ear pad from the headset. Use a damp soft cloth to wipe the surfaces clean. DO NOT soak the headset or immerse it in water; you might damage the electronics. DO NOT bend the microphone boom. 3 4 Instructions for XT-1 Headset Controls and Battery Charging Headset Controls Indicator LED Green Headset in Lane 1 Listen Amber Headset in Lane 2 Listen Volume Up Page Button Tap to Change Order Taker Talk Button Lane 1 Adjustment Slide Volume Down Battery Talk Button Lane 2 Removing Batteries Slide and hold the battery release. Remove the discharged battery from the battery housing. Insert a fully charged battery in the housing with the notch facing the battery release. Make sure the battery is fully inserted (battery release clicks). Charging Batteries To charge a battery, insert the battery in one of the charging slots as shown. The indicator lights RED to indicate the battery is charging. The indicator lights GREEN to indicate the battery is charged. Remove Replace Charging Status Indicator Headset Cleaning For good health and hygiene, every headset should be cleaned on a regular schedule. Before cleaning, remove the battery and the soft foam ear pad from the headset and microphone windscreen if used. DO NOT bend the microphone boom. Battery Charger Order Taking Modes See your Manager to confirm which Order Taking Mode your headset is using. Perform the following procedure to switch to a different order taker mode: 1. Press t until the Mode selection is highlighted. 2. Press Enter. 3. Press s,t, or to select a new order taker mode. See Order Taking Modes on previous page. Note: Your system may be configured with fewer order taking mode options than the number described in this section. You must enter User configuration (passcode required) to enable or disable individual order taking modes.

Enter Configuration Mode (Access Base Station Settings) Configuration mode is a passcode-protected area that contains most of the configuration options for the base station system. Using the access provided for users it is possible to set up all of the functionality of the system. You can record a series of messages then select or combine them to convey standard messages and reduce time and errors. Enter the Greeter Configuration Menu All of the greeter settings are located in a top-level Greeter Setup configuration menu. Perform the following procedure to enter the greeter configuration menu: 2. Press and release Mode until the Greeter Setup menu appears. Record (Store) New Greeter, Reminder and Alert Messages Perform the following procedure to record (store) a new greeter message using a headset: Note: If you store a new greeter message in an occupied slot, the old greeter message will be permanently erased. Adjusting them during slow times will likely produce volume settings that are too low. Note: Inbound and outbound are always defined from the perspective of the headset. Inbound Microphone Volume Changing the inbound microphone volume affects the sound volume coming from the customer order point microphone. The range is 0 (silent) to Outbound Talk Volume Changing the outbound talk volume affects the volume of the speaker at the customer order point. Note: To avoid feedback, set the outbound talk volume as low as possible. The range is 0 (silent) to Vehicle Alert Volume Changing the vehicle alert volume affects the volume of the vehicle alert signal on the headsets. The range is 0 (silent) to Outbound Greeter Message Volume Changing the outbound greeter message volume affects the sound volume of the custom greeting messages and the system internal greetings ( Store Closed and Please Pull Ahead ).

The range is 0 (silent) to Change the Monitor Volume The monitor is an additional speaker that can be used to monitor drive-thru communication without a headset, typically in the kitchen. If the monitor has a volume control built into it, you can use it to control the overall volume level of the speaker. To be more specific about which elements you want to control, follow the instructions below. Inbound Listen Changing the inbound listen volume affects how loudly the monitor plays the inbound (customer order point) communication. You can also disable the monitor playing inbound sounds. To change the inbound listen monitoring settings: 2. Select 02 Monitor Volume. 3. To enable or disable the monitor playing the inbound sounds, change the value for Inbound Listen: Enable to ON or OFF. 4. To change the volume level, select a new value for Inbound Listen: Volume. The range is 0 (silent) to Night Volume You can assign a standard reduction in the volume level of the customer order point speaker for night hours when lower volume is typically required. With the night volume set, the system automatically adjusts the volume during night hours, then back to normal during the day. The range is 0 (silent) to the current day volume level (maximum). Note: Night Volume is never higher than Day Volume. Night volume reduction is a subtracted value, not the resulting level; therefore, if it is the same as the day volume level, the speaker will turn off at night. You cannot change the day outbound talk volume on this screen, only the reduction amount identified above. 6 7 Registering Headsets (G5 or XT-1) Each headset must be registered to a base station before it can be used. Once registered, it should not need to be registered again unless it is intentionally removed. The number is imprinted on the headset and broadcast to the base station whenever it is turned on.

Note: A single headset should not be registered to more than one base station at any given site, whether or not the bases are interconnected. Remove the headset from the existing base station before adding it to a different one. Remove Headsets Perform the following steps to un-register a lost, destroyed, or otherwise removed headset from the system, including a headset that is sent back to 3M for repair. Change Site Scheduling The site schedule is the calendar of store open and closing times. Note: All timekeeping is done using a 24 hour clock (e.g., 6:00 p.m. appears as 18:00). Regular Site Schedule: The regular site schedule is the opening and closing times for each day of the week and the times assigned as Day and Night, which determine when the day and night volume settings change. Press s,t, and to scroll up and down the list. Press s,t, and to scroll through the fields. 7 8 Store is Now Closed Message Perform the following procedure to enable or disable the automatic store closed prompt to let customers know in your absence that the store is closed.Warranty, Limited Remedy, and Disclaimer: 3M warrants that its intercom products will be free from defects in material and manufacture for the period indicated below from the date of shipment to purchaser by 3M or its authorized dealer. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If the 3M intercom product does not conform to this warranty, the sole and exclusive remedy is, at 3M s option, repair or replacement of the 3M product or refund of the purchase price. This warranty does not cover: (1) the cost of shipping products to or from 3M for repair, (2) repair or replacement of existing cable or wiring, (3) product failure caused by misuse, abuse, improper installation, or unapproved modifications, or (4) intercom products that are installed or serviced by a non-3m authorized party.

Paul, Minnesota Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from its intercom products, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted. Paul, MN USA Important Safety Information Read, understand, and follow all safety information prior to installation and operation. Refer to the 3M Drive-Thru Systems Model G5 and XT-1 how to videos or operating instructions for additional information. 3M and Scotch-Brite are trademarks of 3M. Used under license in Canada. Please recycle. Printed in USA. 3M All rights reserved Owner s Manual 1 ATI and all ATI product and product feature names are All rights reserved.Take a moment before you get started You can also use the handset with other bases, such as a BeoCom Please read this user s guide before installing, setting up, and using your new weather Model 407780. Introduction The information contained herein is subject SM 2 UNIVERSAL DOCKING STATION USER S GUIDE INTRODUCTION.3 INSTALLATION.5 Line Pair Switch. 6 Extension Telephone Sets. 7 Warning: All Rights Reserved. Table of Contents Frame Close-up. Remote Control Close-up. Package Contents. This guide describes how to install your phone and how to perform some basic tasks. 1 Installing Owner s Manual. Model BTC008 Please read this user s manual carefully before use. Features Play Smartphone KX-TGP500 Model No. KX-TGP550 Model shown is KX-TGP500. Model shown is KX-TGP550. Thank you for purchasing a Panasonic product. You can configure some of the features MP55BK User Manual This user manual All Rights Reserved.OS: Android 4.0 User and Installation Guide BlueFIDELITYTM Bluetooth Audio Amplifier Model 300 Contents OS: Android 4.0 All rights reserved. All rights reserved.