emotron fdu manual

emotron fdu manual

Page 212: Output coils. show all Thank you, for helping us keep this platform clean. The editors will have a look at it as soon as possible. Full control of flow and pressure ensures an optimized operation, with reduced energy consumption and less downtime. The Emotron FDU also protects your equipment from damage and unnecessary wear. With all its functions included in a compact IP54 enclosure, the Emotron FDU is cost efficiently installed close to the application. The complete range covers motor powers from 0.55 to 3,000 kW. Protective starts and stops Protection. Being able to continuously adapt the operation of your pumps and fans to match demand by controlling motor speed results in considerable energy and maintenance savings, compared to the use of throttling valves or dampers. The latter is like running a car at full throttle while controlling the speed using the brakes. Further energy savings, as well as reduced motor noise, are offered thanks to flux optimization. This. At all times you only use the number of pumps or compressors needed and thus the amount of energy required. An Emotron FDU controls up to seven drives without PLCs or other external equipment. When, for example, one pump reaches its limit, or when the demand decreases, the Emotron FDU starts or stops more pumps. The pressure control is done using the built-in PID process regulator. Which pumps to. Your own process language Several process values and system parameters are available via the communication interface, including current, voltage, shaft power, energy consumption and operating time. No confusion, no time spent on translation and. Built-in programming blocks such as timers and comparators allow you to customize functionality. Customized functionality Easy copying of settings Emotron FDU offers built-in programming blocks, such as logical functions, comparators and timers. This opens the way for customizing functionality according to your requirements.

http://xn--80ag1a2a.xn--p1ai/files/devilbiss-gti-pro-clear-manual.xml

Tags:
• emotron fdu manual, emotron fdu 2.0 manual, emotron fdu 40 manual, emotron fdu 2.0 ac drive manual, emotron vfx fdu 2.0 manual, emotron fdu 48 manual, emotron fdu 2.0 manuale italiano, emotron fdu user manual, emotron fdu manual, emotron fdu manuale, emotron fdu manual transmission, emotron fdu manual user, emotron fdu manual professional, emotron fdu manual.

You can, for example, set the AC drive to automatically clean a pump using a timer. The pump is run at full speed for a certain time to. The compact format and IP54 classification means the units can be installed close to the application. Flexible cable connection reduces the need for tools and terminals. Compact IP54 for cost-efficient installation Emotron FDUs in the 0.55-132 kW range are compact wall-mounted units, all IP54 classified and just as protected against dust and water as an electric motor. They have a robust metal construction and can withstand harsh environments. You can install the units close to the. The modular design offers reduncancy and easy servicing. Modular design The 160 to 3,000 kW Emotron AC drives are built-up with parallel connected 3-phase power modules. The modular design offers the possibility of redundancy operation. Operation can continue by temporarily running with reduced power capacity while one of the modules is out of operation. For very critical processes, you can even equip the system with an extra power module, to. Options to customize your AC drive A number of options are available to let you customize Emotron FDU 2.0 functionality and fully utilize the product according to your needs. The compact option boards increase flexibility and cost-efficiency. They are easy to mount and up to four options can be combined. Versatile communication options Like all Emotron products, the. You can also connect two PT100 sensors for motor protection and one PT100 for process feedback, measuring temperature without using a transducer.Energy consumption can be reduced by recycling the heat produced by the AC drive. You will also reduce noise and heat in the. Should a problem occur in the process, a full status report will help you to quickly identify the cause and take corrective measures. Simplified troubleshooting and maintenance Maintenance is simplified and downtime reduced thanks to a number of features.

http://www.albergotrattoriaalcastello.com/userfiles/devilbiss-home-suction-unit-manual.xml

Fewer critical parts, which are easy to access, increase reliability. Detailed alarms help you identify the process problem quickly in order to take preventive action. Full status reports make troubleshooting easier Efficient alarm detection and detailed codes help you achieve reliable. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates. Following symbols can appear in this manual.Warning! Failure to follow these instructions can result in serious injury to the user in addition to serious damage to the C drive. HOT SURFCE! Failure to follow these instructions can result in injury to the user. Handling the C drive Installation, commissioning, demounting, taking measurements, etc, of or on the C drive may only be carried out by personnel technically qualified for the task.Opening the C drive WRNING.Precautions to be taken with a connected motor If work must be carried out on a connected motor or on the driven machine, the mains voltage must always be disconnected from the C drive first. Wait at least 7 minutes before starting work. Earthing The C drive must always be earthed via the mains safety earth connection. Earth leakage current CUTION. This C drive has an earth leakage current.When the PE conductor in the used cable type is not in accordance with the above mentioned cross-sectional area requirements, a separate PE conductor should be used to establish this. Residual current device (RCD) compatibility This product cause a DC current in the protective conductor. Where a residual current device (RCD) is used for protection in case of direct or indirect contact, only a Type B RCD is allowed on the supply side of this product. Use RCD of 300 m minimum. EMC Regulations In order to comply with the EMC Directive, it is absolutely necessary to follow the installation instructions.Mains voltage selection The C drive may be ordered for use with the mains voltage range listed below.

https://skazkina.com/ru/boss-loop-station-manual-rc-2

FDU48: V FDU52: V FDU69: V Voltage tests (Megger) Do not carry out voltage tests (Megger) on the motor, before all the motor cables have been disconnected from the C drive.This can result in sensitive components becoming damp. Do not connect the mains voltage until all visible dampness has evaporated. Incorrect connection The C drive is not protected against incorrect connection of the mains voltage, and in particular against connection of the mains voltage to the motor outlets U, V and W. The C drive can be damaged in this way. Power factor capacitors for improving cos Remove all capacitors from the motor and the motor outlet. Precautions during utoreset When the automatic reset is active, the motor will restart automatically provided that the cause of the trip has been removed. If necessary take the appropriate precautions. Transport To avoid damage, keep the C drive in its original packaging during transport. This packaging is specially designed to absorb shocks during transport. IT Mains supply The C drives can be modified for an IT mains supply, (non-earthed neutral), please contact your supplier for details.Heat warning HOT SURFCE. Be aware of specific parts on the C drive having high temperature. DC-link residual voltage WRNING.In case of malfunction a qualified technician should check the DC-link or wait for one hour before dismantling the C drive for repair.It can also be used for e.g. compressors and blowers. Several options are available, listed in chapter 13.NOTE: Read this instruction manual carefully before starting installation, connection or working with the C drive. Users This instruction manual is intended for: installation engineers maintenance engineers operators service engineers Motors The C drive is suitable for use with standard 3-phase asynchronous motors. Under certain conditions it is possible to use other types of motors. Contact your supplier for details. 1.1 Delivery and unpacking Check for any visible signs of damage.

https://jagatex.pl/images/99-mercury-tracer-owner-s-manual.pdf

Inform your supplier immediately of any damage found. Do not install the C drive if damage is found. The C drives are delivered with a template for positioning the fixing holes on a flat surface. Check that all items are present and that the type number is correct. 1.2 Using of the instruction manual Within this instruction manual the abbreviation C drive is used to indicate the complete variable speed drive as a single unit. Check that the software version number on the first page of this manual matches the software version in the C drive. See chapter 11.9 page 181 With help of the index and the table of contents it is easy to track individual functions and to find out how to use and set them. The Quick Setup Card can be put in a cabinet door, so that it is always easy to access in case of an emergency. 1.3 Warranty The warranty applies when the equipment is installed, operated and maintained according to instructions in this instruction manual. Duration of warranty as per contract. Faults that arise due to faulty installation or operation are not covered by the warranty. 1.4 Type code number Fig. 1 gives an example of the type code numbering used on all C drives. With this code number the exact type of the drive can be determined. This identification will be required for type specific information when mounting and installing. The code number is located on the product label, on the front of the unit. It also includes establishments directly connected without intermediate transformers to a low voltage power supply network that supplies buildings used for domestic purposes. Category C2: Power Drive System (PDS) of rated voltage EMC Directive: Declaration of Conformity and CE marking djustable speed electrical power drive systems Part 5-1. Safety requirements - Electrical, thermal and energy. Low Voltage Directive: Declaration of Conformity and CE marking Classification of environmental conditions.Chemical gases 3C2, Solid particles 3S2.

Optional with coated boards Unit in operation. Chemical gases Class 3C3, Solid particles 3S2. UL Safety standard for Power Conversion Equipment UL Safety standard for Power Conversion Equipment. Insulation coordination including clearances and creepage distances for electrical equipment. 1.6 Dismantling and scrapping The enclosures of the drives are made from recyclable material as aluminium, iron and plastic. Each drive contains a number of components demanding special treatment, for example electrolytic capacitors. The circuit boards contain small amounts of tin and lead.By ensuring this product is disposed of correctly, you will help prevent potentially negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact the local distributor of the product.Before mounting it is recommended that the installation is planned out first. Be sure that the C drive suits the mounting location. The mounting site must support the weight of the C drive. Consider using a vibration damper. Check ambient conditions, ratings, required cooling air flow, compatibility of the motor, etc. Know how the C drive will be lifted and transported. Recommended for C drive models -300 to - 3K0 Lifting eyes 2.1 Lifting instructions Note: To prevent personal risks and any damage to the unit during lifting, it is advised that the lifting methods described below are used. Recommended for C drive models -090 to -250 Load: 56 to 74 kg Fig. 3 Remove the roof unit and use the lifting eyes to lift single unit 600mm and 900mm.Valid if free space on opposite side.These PEBBs can be folded out to be replaced.Select cable type and screening according to the EMC requirements valid for the environment where the C drive is installed. 3.

1 Before installation Read the following checklist and prepare for your application before installation. Local or remote control. If the C drive is temporarily stored before being connected, please check the technical data for environmental conditions. If the C drive is moved from a cold storage room to the room where it is to be installed, condensation can form on it.The litz ground connection see fig. 21, is only necessary if the mounting plate is painted.Connect the mains cables according to fig. 17 or 18. The C drive has as standard a built-in RFI mains filter that complies with category C3 which suits the Second Environment standard. The cable must be able to carry the C drive load current. Recommendations for selecting mains cables To fulfil EMC purposes it is not necessary to use screened mains cables. Dimension the cables and fuses in accordance with local regulations and the nominal current of the motor. See table 50, page 208. PE conductor cross-sectional area shall for cable size 35mm 2 the PE conductor cross-sectional area should be at least 50 of the used phase conductor.Model - OCSM HVAC Pocket Programming Guide Transistor D.C. Chopper Controller Type GS 24 S It will also show the user how to Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard. HVAC Inverters made simple Documentation. Please read this document carefully before installing and commissioning the brake module! Alarm Systems. Reliable Supervision and Control A WARNING: This product must be correctly installed and configured to work properly (see pages 12-24). If you are not experienced in wiring electrical Page 2 2 Installation. Page 10 5 Troubleshooting Page For further Safety instructions Powered by Eaton Technology. User Manual If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to the MicroView Such problems include OWNER S MANUAL Read these instructions before use.

Danfoss Vent BEFORE operation please read this user s manual carefully. Keep this manual readily available. It is ESSENTIAL In addition there is a 2 year parts warranty on the compressor VLT HVAC Drive FC 102, 1.1-90 kw Frequency converters contain high voltage when connected to AC mains input power. We see harmony as a state of balance. The feeling that the solution created is the best possible for your specific needs. That the supplier OWNER S MANUAL Read these instructions before use.PCA T5 BASIC lp Y II, 14 80 W BASIC T5 Features 76 2 Load regulated multi-protocol decoder Temperature control and cooling systems. The innovative and reliable solution Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions With their MDRC profile and a width of only All Rights Reserved. 5 Safety instructions Description TIME MARK CORPORATION 11440 EAST PINE STREET TULSA, OK 74116 USA tel 918 438-1220 fax 918 437-7584 www.time-mark.com DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. GPACU12HR CONTENTS Introduction Safety Notes Identification of parts Installation instructions Operation instructions Maintenance Troubleshooting Application: Product Features: Safety Relay Unit March 2008 Dallas, Texas Dallas, Texas May, 2012 NEVER OPERATE THE SFS81 MANUALLY NEVER OPERATE THE SFS81 WITH PERSONEL IN THE WORKCELL DO NOT USE LUBRICATED AIR. This device requires To use this website, you must agree to our Privacy Policy, including cookie policy. You must have JavaScript enabled in your browser to utilize the functionality of this website. For more information on what data is contained in the cookies, please see our Privacy Policy page. To accept cookies from this site, please click the Allow button. Full control of flow and pressure ensures an optimized operation, with reduced energy consumption and less downtime. The Emotron FDU also protects your equipment from damage and unnecessary wear.

An intuitive user and process interface makes it easy to communicate critical parameters to other parts of your process. Fit-for-purpose is the key term for Emotron FDU. Powers up to 3,000 kW. Emotron FDU 2.0 AC drive optimizes the operation of your pumps, fans, compressors and blowers. Your process is protected Emotron FDU 2.0 AC drive Instruction manual English Software version 4.3X Emotron FDU 2.0 INSTRUCTION MAN Emotron FDU variable speed drives offer soft starts and stops that. Speed Drive, VSD. does exceed 3.5 mA AC. Therefore the 2.0. Adjustable speed electrical power drive systems Part 5-1. A number of national, regional and local regulations govern handling, storage and installation of the equipment. Always observe current rules and legislation. Opening the AC drive Always take adequate precautions before opening the AC drive. Although the connections for the control signals and the switches are isolated from the main voltage, do not touch the control board when the AC drive is switched on. Precautions to be taken with a connected motorIf work must be carried out on a connected motor or on the driven machine, the mains voltage must always be disconnected from the AC drive first. Wait at least 10 minutes before starting work. EarthingThe AC drive must always be earthed via the mains safety earth connection. Where a residual current device (RCD) is used for protection in case of direct or indirect contact, only a Type B RCD is allowed on the supply side of this product. Use RCD of 300 mA minimum. EMC RegulationsIn order to comply with the EMC Directive, it is absolutely necessary to follow the installation instructions. All installation descriptions in this manual follow the EMC Directive. Voltage tests (Megger)Do not carry out voltage tests (Megger) on the motor, before all the motor cables have been disconnected from the AC drive. CondensationIf the AC drive is moved from a cold (storage) room to a room where it will be installed, condensation can occur.

This can result in sensitive components becoming damp. Do not connect the mains voltage until all visible dampness has evaporated. CAUTION!This AC drive has an earth leakage current which does exceed 3.5 mA AC. Therefore the minimum size of the protective earth conductor must comply with the local safety regulations for high leakage current equipment which means that according to the standard IEC61800-5-1 the protective earth connection must be assured by one of following conditions:PE conductor cross-sectional area shall for phase cable size 10 mm2 Cu (16 mm2 Al) or a second PE conductor with same area as original PE conductor. For cable size above 16 mm2 but smaller or equal to 35 mm2 the PE conductor cross-sectional area shall be at least 16 mm2. Power factor capacitors for improving cosRemove all capacitors from the motor and the motor outlet. Precautions during AutoresetWhen the automatic reset is active, the motor will restart automatically provided that the cause of the trip has been removed. If necessary take the appropriate precautions. TransportTo avoid damage, keep the AC drive in its original packaging during transport. This packaging is specially designed to absorb shocks during transport. IT Mains supplyThe AC drives can be modified for an IT mains supply, (non-earthed neutral), please contact your supplier for details. AlarmsNever disregard an alarm. Always check and remedy the cause of an alarm. DC-link residual voltage WARNING!After switching off the mains supply, dangerous voltage can still be present in the AC drive. This is a Quick Start Guide providing brief information about how to install this AC drive and how to get started. Before you start mounting and installation, please read and consider the Safety chapter first.The software instruction manual you will find in the file archive on www.emotron.com. In the software instruction manual you will find detailed information for setting up and running this AC drive.

Instruction manuals for optional boards are also found in the file archive.All documentation is available on www.emotron.com. 1.1 Model ExplanationThe Model shown on product label indicates the series name, applicable type of power supply, power class and hardware, etc. With this code number the exact type of the drive can be determined. This identification will be required for type specific information when mounting and installing. It continuously adapts motor speed to the level required, minimizing energy consumption and wear. A unique monitoring functionality protects your process from damage and unplanned downtime. Typical applications are pumps, fans, compressors, and blowers. Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime. Report this Document Download Now Save Save Emotron Fdu Instruction Manual 01-2232-04 r6.Es For Later 0 ratings 0 found this document useful (0 votes) 11 views 92 pages Emotron Fdu Instruction Manual 01-2232-04 r6.Es Uploaded by InesMolloSanchez Description: var Full description Save Save Emotron Fdu Instruction Manual 01-2232-04 r6.Es For Later 0 0 found this document useful, Mark this document as useful 0 0 found this document not useful, Mark this document as not useful Embed Share Print Download Now Jump to Page You are on page 1 of 92 Search inside document Browse Books Site Directory Site Language: English Change Language English Change Language. It strips results to show pages such as.edu or.org and includes more than 1 billion publications, such as web pages, books, encyclopedias, journals, and newspapers. All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you. Instruction Manual F1-21 ISSUE 6 We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Interested in this product? View Complete Details Specification: Voltage: 380-480 V, 3-Phase Rated Current: 3.8-36 A View Complete Details Features: Emotron VSU is dynamic drive for use in all industrial application where simplicity, reliability and productivity is required Functionality is easily adapted to your specific application requirement Specification: Voltage: 380-480 V, 3-Phase Rated Current: 3.8-36 A View Complete Details. Do nasho portfolia patria tiez pakove a pedalove ovladace GESSMANN, ako aj rozbehove, brzdne odpory ci zemniace rezistory GINO ESE. Ak vas zaujima cena frekvencnych menicov, softstarterov alebo inych produktov, alebo ak mate lubovolnu technicku otazku kontaktujte nas alebo nam zavolajte. Jej prehliadanim vyjadrujete suhlas s ich pouzivanim. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience. Necessary Always Enabled Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information. Non-necessary Non-necessary Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website. Please upgrade to a newer version or try a different browser. Kontrol edilen ekipman?n yuk egrisi tum h?z aral?g?

nda izlenir boylece herhangi bir as?r? ya da dusuk yuk durumu olustugunda an?nda tespit edilir. Olusabilecek hasar? onlemek icin gerekli olan alarm ve hata stop seviyeleri kolayca programdan ayarlan?r. Kuru cal?sma, kavitasyon, as?r? s?cakl?k veya t?kan?k borular gibi sebeblerden dolay.Emotron FDU prosesi mumkun oldugu kadar verimli bir sekilde cal?st?rarak koruma saglar. Coklu Pompa Kontrolu: Pompa veya kompresorlerin paralel olarak coklu kullan?lma metodu, degisken ihtiyaclar.Tum h?z aral?g?nda, sadece gerekli say?da pompa veya kompresor devreye sokularak, debi ihtiyac?n? kars?layacak sekilde gerektigi kadar enerji harcan?r. Emotron FDU motor h?z kontrol cihaz?, kendi bunyesinde standart olarak bulunan uygulama makrosu sayesinde herhangi bir harici otomasyon urunune (PLC) gerek kalmadan 7’ ye kadar pompa (kompresor vs) surebilir. Ornegin; bir pompa max.h?z?na ulast?g? zaman veya ihtiyac azald?g?nda, esit yasland?rma da goz onunde bulundurularak hangi pompan?n devrede kalacag? hangi pompan?n devreden c?kacag? FDU taraf?ndan belirlenir. Herhangi bir pompa devreden c?kacaksa en yasl? pompa devreden c?kar?l?r veya herhangi bir pompa ar?zal?n?rsa sistem otomatik olarak en genc diger pompay. Failure to follow these instructions can result in malfunction or damage to the C drive. Failure to follow these instructions can result in injury to the user. Handling the C drive Installation, commissioning, demounting, taking measurements, etc, of or on the C drive may only be carried out by personnel technically qualified for the task. Precautions to be taken with a connected motor If work must be carried out on a connected motor or on the driven machine, the mains voltage must always be disconnected from the C drive first. Wait at least 7 minutes before starting work. This C drive has an earth leakage current.

Therefore the minimum size of the protective earth conductor must comply with the local safety regulations for high leakage current equipment which means that according the standard IEC the protective earth connection must be assured by one of following conditions: When the PE conductor in the used cable type is not in accordance with the above mentioned cross-sectional area requirements, a separate PE conductor should be used to establish this. Use RCD of m minimum. V FDU V Voltage tests Megger Do not carry out voltage tests Megger on the motor, before all the motor cables have been disconnected from the C drive. It seems that page you are looking for no longer exists. These cookies are used to collect information about how you interact with our website and allow us to remember you. We use this information in order to improve and customize your browsing experience and for analytics and metrics about our visitors both on this website and other media. To find out more about the cookies we use, see our Privacy Policy.Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information. It is mandatory to procure user consent prior to running these cookies on your website. Ask us anything.

These location services must be turned on and available to your device for the app to use them. Apps may use this to determine where you are, and may consume additional battery power.This permission allows the app to use the camera at any time without your confirmation.For example, the phone disables the keylock when receiving an incoming phone call, then re-enables the keylock when the call is finished.This may include any accounts created by applications you have installed.The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.This may allow the app to share or save your calendar data, regardless of confidentiality or sensitivity.This permission allows apps to save your contact data, and malicious apps may share contact data without your knowledge.This allows the app to read all SMS messages, regardless of content or confidentiality.For example, this can determine whether the People app is synced with an account.This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.This means the app could monitor or delete messages sent to your device without showing them to you.This permission allows the app to record audio at any time without your confirmation.This may result in unexpected charges. Malicious apps may cost you money by sending messages without your confirmation.This may allow the app to send messages that appear to come from calendar owners, or modify events without the owners' knowledge.This permission allows apps to delete contact data.Malicious apps may corrupt your system's configuration.Malicious apps may delete your messages.For example, this can be used to enable sync of the People app with an account.MailDroid is the one you should download!. This application can also sync Microsoft Exchange account not having IMAP or POP directly exposed.